Kamoer auto top off (ATO) One 2 SE

Product overview

The Kamoer ATO One 2 SE replaces water lost to evaporation and holds the aquarium or sump at a set level. Mount the magnetic optical sensors, connect the DC 12 V refill pump, and plug it in. No programming or calibration.

Key features

• Blue sensor watches the normal water level and starts the pump when the level drops
• Red sensor sits higher and acts as an overflow backup
• Magnetic mounts for glass or acrylic
• DC 12 V submersible pump for a freshwater reservoir
• Anti-siphon fitting stops water siphoning from the tank back into the reservoir
• Status lights and a buzzer for a pump that runs too long, a dry reservoir, the overflow sensor, a disconnected pump, or low water in the refill container

Water and system compatibility

Freshwater and marine/reef. Top-off water is freshwater, held in a separate reservoir.

What's included

• Main controller
• Blue optical water level sensor
• Red anti-overflow optical sensor
• DC 12 V submersible refill pump
• Power adapter with an Australian plug
• Tubing and anti-siphon fitting
• User manual

Specifications

• Pump: DC 12 V submersible
• Sensors: magnetic optical level sensors
• Operation: automatic

Installation

1. Mount the blue sensor at the normal water level.
2. Mount the red sensor higher, as the overflow backup.
3. Place the pump in the freshwater reservoir and fit the tubing and anti-siphon fitting.
4. Connect the pump and sensors to the controller, then plug in the power adapter.

Always follow directions on product packaging.