- Home
- Aqua One Thermosafe Heaters
Aqua One Thermosafe Heaters
Pick-up available at Williamstown Aquarium store
Other shipping options / costs available at checkout
Description
Description
Product overview
Aqua One ThermoSafe heaters keep aquarium water at a stable temperature. The tube is shatter-resistant quartz, fully submersible, and has a microchip thermal cut-off that shuts the heater down if it runs dry.
Temperature is set with a simple dial and an easy-to-read scale. An indicator light shows when the heater is on.
Key features
- Shatter-resistant quartz glass
- Microchip-controlled thermal cut-off
- Fully submersible
- Adjustable 20°C–34°C
- Easy-to-read temperature scale and indicator light
- Suction clips included
Water and system compatibility
Suitable for coldwater, tropical freshwater, and marine aquariums.
Need to work out your tank's litreage? Use our volume calculator.
What’s included
- ThermoSafe heater
- Suction clips
Specifications
| Wattage | For aquariums up to | Length |
|---|---|---|
| 25 W | 25 L | 24 cm |
| 50 W | 50 L | 24 cm |
| 100 W | 100 L | 30 cm |
| 150 W | 150 L | 30 cm |
| 200 W | 200 L | 40 cm |
| 300 W | 300 L | 40 cm |
Cable length 1.8 m. Operating voltage 240 V / 50 Hz. As a guide, allow about 1 watt per litre; if your tank sits between sizes, choose the next wattage up.
Installation
- Mount the heater fully submerged, near good flow, and off the substrate.
- Fit the suction clips on the top third of the heater, not on the heating element.
- Do not plug the heater in unless it is fully submerged. Use a drip loop on the cord.
- Set the temperature on the dial, then check with a thermometer at the far end of the tank.
- Unplug and allow 10–15 minutes to cool before removing the heater from the water.
Always follow directions on product packaging.